1-800-729-3822 ext. 221  

The shell is not being hit hard enough.

In this situation, the firing pin is being released, however the shell is not being hit hard enough by the firing pin.

This most likely is caused by a lubrication issue. Click HERE for lubrication instructions.

If lubrication did NOT fix the problem, please click NEXT

Please also check out:

NotHitShellNew.wmv (4 MB)

FAQ

Old style Electronics

Bumper Boy launcher were designed to maintain and be fixed in the field. Understanding basic things like lubrication, replacing a servo and basic problem Trouble shooting will save you time and money. You must have a spare servo in order to provide field test. These can be purchased from Bumper Boy or a local Hobby store. (use Futaba 3003 or GWS)

First determine if the issue is a electronic issue or a mechanical or servo issue.

Determining Electronic Issues:

Identify the problem.

Power Problems

Communication Issues

Program, Change Sounds, Add a Second Unit

Mechanical Issues:


New style Electronics

Bumper Boy launcher were designed to maintain and be fixed in the field. Understanding basic things like lubrication, replacing a servo and basic problem Trouble shooting will save you time and money. You must have a spare servo in order to provide field test. These can be purchased from Bumper Boy or a local Hobby store. (use Futaba 3003 or GWS)

First determine if the issue is a electronic issue or a mechanical or servo issue.

Determining Electronic Issues:

Identify the problem.

Power Problems

Communication issues

Mechanical Issues

Hawx Electronics







Contact   |   Copyright Bumperboy 2011